Xerox 1xx Manual do Utilizador Página 39
- Página / 70
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
Xerox Nuvera Tips by stock type
Paper Guide 3-9
CAUTION
• Never print on sheets that were printed with rubber-based inks or cured with a drying
agent (starch, talc, or rosin powders). Machine contamination will result, causing
background spotting, streaking, deposits in the fuser and/or spots on the photoreceptor.
• If you wish to use a preprinted paper that has not been tested by Xerox, check with your
Xerox representative first. Some preprinted papers can cause system damage.
Preprinted Paper
Note
When printing over offset inks, image permanence may be compromised.
Description Any previously printed paper that will be printed on again. Examples of preprinted
papers are forms, mailers and catalogs that will be personalized with customer
names and addresses.
Selection tips • Select papers printed with laser-compatible, lithographic inks to minimize
offsetting. UV-cured inks are recommended, especially on coated stocks, to
insure complete drying before printing on a Xerox Nuvera. Laser inks can be
oxidative, or heat set types.
• Do not use papers preprinted with xerographic processes.
• Design the preprinted image so that no ink, varnish, or aqueous coating is
placed in the area to be printed on by a Xerox Nuvera. Toner adhesion can not
be assured when printing over inks or varnish. If the Xerox Nuvera image must
be printed over pre-printed ink, results are more likely to be acceptable if the
color is screened back to less than 30% or the base stock is uncoated paper.
• Select preprinted sheets that are free of excessive curl.
• Select uncoated and coated papers that are laser compatible or that appear in
the Media Compatibility Guide.
• Select preprinted materials that are able to withstand:
– Fuser temperatures of up to 437F (225 C) at 100 pounds per square inch
for 29 milliseconds.
– Exposure to fuser fluid.
• Avoid cold set inks to prevent excessive offsetting.
• Avoid conductive inks containing carbon blacks or metal powders.
– Sheets will not hold sufficient electrical charge for proper dry ink transfer.
– Paper handling problems may occur with conductive inks.
• Test a small quantity of a preprinted paper before ordering a large quantity.
However, if the guidelines provided here are not followed, results may be
inconsistent.
Storage tips Protect preprinted sheets from moisture to prevent image quality defects and
feeding problems.
Usage tips • Load preprinted letterhead stock with the letterhead facing up and against the
inboard (back) edge. The correct orientation is shown on the paper loading label
inside the feeder tray.
• If preprinted sheets are trimmed prior to being imaged on the Xerox Nuvera,
vacuum or brush the edges to remove debris in addition to fanning the sheets.
• To avoid registration problems due to non-uniform sheet cut, use the same sheet
orientation (outboard and lead edge) on the Xerox Nuvera that was used on the
offset press.
• Preprinted sheets must be run uncollated. All sheets in a single paper tray must
contain the same preprinted image.
- Xerox Nuvera 1
- Paper Guide 1
- Table of Contents 3
- v Paper Guide 4
- Introduction 5
- Related resources 6
- Selecting stock 7
- Recommended stocks 8
- Xerox Nuvera Selecting stock 9
- Paper Guide 1-3 9
- °F (225°C) 10
- Ordering guidelines for paper 11
- Brightness 12
- Finish / Smoothness 13
- Formation 14
- Impurities 14
- Moisture content 15
- Determining grain direction 17
- Cut quality 18
- Surface strength 18
- Managing your 19
- Checking paper for defects 20
- Handling paper 21
- Paper and moisture 22
- Controlling moisture in paper 23
- Weekend shutdown 24
- Paper Guide 2-9 27
- Inserter hints and tips 29
- 2-12 Paper Guide 30
- Tips by stock type 31
- Stock types 32
- Tips that apply to all stocks 33
- Bond (56 to 158 gsm) 33
- Bristol (147 to 220 gsm) 33
- 3-4 Paper Guide 34
- Carbonless 34
- Cover Coated (140 to 220 gsm) 34
- Drilled Paper 35
- Envelopes 35
- 3-6 Paper Guide 36
- Index (130 to 220 gsm) 36
- Label Stock 37
- 3-8 Paper Guide 38
- Perforated Paper 38
- 3-12 Paper Guide 42
- Transparencies 42
- 3-14 Paper Guide 44
- About Xerox papers 45
- To order Xerox paper 46
- Converting paper 47
- Examples 48
- Printing with tabs 51
- Installing the tabs guide 52
- Paper Guide B-3 53
- Printing on tabbed stock 54
- Managing the 55
- Prevent a tray from feeding 57
- Inserter procedures 58
- Managing Finishers 59
- Unload stacker cart 60
- View stacker settings 60
- Managing the Stock 61
- Delete a stock 62
- Edit stock attributes 62
- Glossary of Paper 63
- F-2 Paper Guide 64
- Glossary Term Definition 64
- F-4 Paper Guide 66
- F-6 Paper Guide 68
Manuais e produtos relacionados com Impressora multifunções Xerox 1xx
(83 páginas)
(2 páginas)
(18 páginas)
Impressora multifunções Xerox C1190 Manual do Utilizador
(231 páginas)
IBM Voluntary Community Assistance Network V-CAN manuály
Uživatelské manuály a uživatelské příručky pro Hardware IBM Voluntary Community Assistance Network V-CAN.
Poskytujeme 1 manuály pdf IBM Voluntary Community Assistance Network V-CAN ke stažení zdarma podle typů dokumentů: Uživatelský manuál
Comentários a estes Manuais