Xerox C3000 Manual do Utilizador descarregar pdf (Página 181)

Printing Options

171

Just size printing

If you enable this function, received documents are printed on the sheet that has

the highest priority.

This function is enabled with User Parameters (switch 05, bit 5) in the Facsimile

Features menu.

If the paper tray is not stocked with paper of a suitable size to print a received

document, a message appears on the display prompting you to load paper of the

required size. When you have loaded new paper, press [Exit] to print the docu-

ment.

Note

❒ After pressing [Exit], procedure varies depending on machine status when the

message occurred.

• If any received documents or reports were being printed automatically, the

printer automatically continues printing from where it left off.

• If any documents or reports were being printed manually, the printer does

not resume printing. Perform the operation from the beginning again.

Reference

“Facsimile Features”, General Settings Guide

Having incoming documents printed on paper from the bypass tray

You can print documents sent from Specified Senders on paper from the bypass

tray.

Set as follows:

• Program a special sender and select the Bypass Tray for the paper tray type.

• In “Program Special Sender” in the Facsimile Features menu, turn on the

“Special Reception Function” in “Initial Set Up”.

Important

❒ When using this function, printed sheets cannot be delivered to the finisher

output tray. Even if you specify the finisher output tray, sheets are delivered

to the Internal Tray 1.

1 2 ... 176 177 178 179 180 181 182 183 184 185 186 ... 297 298

Sem comentários

Xerox C3000 Manual do Utilizador Página 181